ATS EScope
PC Based 8 Channel Oscilloscope/Meter/Function Generator
The EScope is a PC based 8 channel, dual time base, oscilloscope, meter, and function generator. The EScope has won Motor Magazine's prestigious Top 20 Tools Award for 2004.
| EScope & Computer: custom configured & capable of running all ATS diagnostic tools. |
|
| EScope: Eight channel dual time base PC automotive diagnostic scope. Digital voltage meter, function generator, counter, and feedback equation (virtual replacement of electrical sensors). Includes software upgrades for one year minimum and full technical support. |
$4495 USD Add to Cart |
More Details and Pictures Below
(click pictures to enlarge)
+/- 10 or +/- 200 Volt Range on all Eight Channels (Built in 20X Dividers!)
> 10 Mega Ohm Input Impedance on all Eight Channels for +/- 10V Range
> 1 Mega Ohm Input Impedance on all Eight Channels for +/- 200V Range
12 Bit (0.024%) Resolution on all Eight Channels
Large 1024x768 Pixel (XGA) Viewing Area with Large Colored Traces
Data Can be Saved to Text File for Future Retrieval
Data Can be Saved to JPEG Image for E-mailing or Documentation
Web Enabled for Remote Monitoring on LAN or Internet
All Channels in Full Color with Masking to assist troubleshooting
Dual Time Bases, Both Viewable Simultaneously on Separate Charts
Each Channel can be Turned On or Off on Either Chart while Running or Holding
Hold Buttons Allow Viewing of Last Five Screen Sweeps
8 Channel Stacked Oscilloscope
Stacks Dual A Oscilloscope Data with Independent Ranges for Each Channel
All Channels in Full Color with Masking to assist troubleshooting
Hold Buttons Allow Viewing of Last Five Screen Sweeps
MultiTool Tab allows Simultaneous Viewing of EScope Data along with Data from other ATS Diagnostic Tools
Measure and Deep Record
Use cursors to easily measure voltage, voltage difference, period (s), and frequency (Hz)
Easily Zoom Window, Zoom In, Zoom Out, Zoom All (extents) with mouse
Easily Pan using mouse
Data to be measured can come from Plot A, Plot B, or Deep Record
Deep Record allows continuous recording of 250,000 samples of data on all eight channels
After 250,000 sample buffer has been filled recording will continue erasing start of buffer only so the last 250,000 samples are always available for viewing and saving to file
Eight Digital Readouts
Eight Slide Bar Readouts in Vivid Color
Independent Slide Bar Range Adjustments for Each Channel
One TTL Output with Frequency and Duty Control
One Pull Down Circuit with Frequency and Duty Control. Can Control High Current Devices like Fuel Injectors, EGR Solenoids, Canister Purge Solenoids, etc.
Two Counter Inputs that can Measure Frequency, Period, Pulse Width, and Number of Pulses
Chart Graphing for Count History
-10 to +10 Volts DC output
Automotive Sensor Simulator Intercepts Sensor Signal on Meter and Sends Modified Signal to PCM
Slow Frequency Waveform Generation: Sin, Triangle, Square, and Sawtooth (Ramp)
Files recorded can be played back as live data
Provides ideal training setup without needing problematic vehicles in classroom
Files can be created by instructor or can be loaded from library provided by ATS
