Bendix PCMCIA Card
Bendix PCMCIA Card
Code: MPI-805013
Price:$522.00
Qty  

Shipping Weight: 2.00 pounds

Bendix Application 30/30T W/PLC

No. MPI-805013 ~ Nexiq Bendix Application 30/30T W/PLC

Application Card For The MPC, Pro-Link Plus And Pro-Link Graphiq.

FEATURES
  • Bendix tractor and trailer support
  • End of line test
  • Loaded voltage test
  • Trailer odometer reading/setting
  • J1939 datalink status
  • Modify ECU configuration:
    • Trailer ABS setting
  • J1587/J1708/J2497/J1939 broadcast options
  • NEW added support for ABS6 and TABS6 ECUs
  • Power Line Carrier (PLC) Test application for trailer ABS

Kit Includes: Application card and Manual

PCMCIA

The Bendix ABS/ATC application software provides the capability to test and diagnose vehicles using EC-15, EC-16, EC-17 and EC-30/30T (Tractor and Trailer) Bendix systems. To address advanced capabilities provided by Bendix, the MPC uses PCMCIA cards. The card is plugged into the back of the unit, and provides additional functions unique to Bendix. The following list contains all of the features and functions available with this card.

FUNCTIONS
  • Display fault codes
  • Display front, middle and rear MPH
  • Check battery voltage
  • Check warning and traction lamps
  • Check engine and retarder datalink
  • Check retarder relay
  • End of line test
  • Runs ABS system component tests
  • System configuration adjusts tire size
  • Change settings of system parameters
  • Clears active and history faults
  • Snapshot mode for capturing intermittent problems
  • Create custom data lists
  • Printer output capabilities

POWER LINE CARRIER (PLC) TEST

APPLICATION FOR TRAILER ABS

Effective March 2001, a Federal Government mandate required that heavy-duty trucks have an in-cab trailer ABS warning lamp. Using a new SAE standard called PLC communication, the change requires trailer ABS ECU’s to communicate with the tractor ECU via the J560 power line to activate the warning lamp. NEXIQ’s PLC Converter (sold separately) is also required for PLC communication. The PLC test application is easy to use and provides the ability to:

  • Verify trailer ABS ECU for MID 10 and MID 11 messages.
  • Toggle in-cab trailer ABS warning lamp ON/OFF to confirm operation.
  • Test tractor and trailer coupled or trailer independently for MID messages.

Notes:
  • The MPC (Multi-Protocol Cartridge P/N MPI-208040) will need to be purchased separately if you do not already have this part.
  • Requires NEXIQ PLC Converter Kit (P/N MPI-601020